Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › from 2022.09
NM25T0E _58 Vehicle Interior _127448 PRE-COLLISION _0548942 PRE-COLLISION SYSTEM DE DETAILS F

PRE-COLLISION  PRE-COLLISION SYSTEM  DETAILS  INDICATOR LIGHT/WARNING LIGHT/MULTI DISPLAY  


CONSTRUCTION


a.

The combination meter assembly uses the PCS activation indicator light, PCS warning light, VSC OFF indicator light and buzzer to provide the driver with pre-collision system warnings and indications.

Y279292C01
2.365,3.49 2.531,2.906 true 3.188,3.573 3.135,3.271 true 5.26,0.865 5.417,0.438 true 1.698,0.865 1.51,0.417 true 1.396,0.24 1.708,0.396 0.313,0.156 10 false *1 2.281,3.542 2.594,3.698 0.313,0.156 10 false *2 3.146,3.604 3.458,3.76 0.313,0.156 10 false *3 5.365,0.24 5.677,0.396 0.313,0.156 10 false *4
*1 Combination Meter Assembly
·

Buzzer


*2 VSC OFF Indicator Light
*3 PCS Warning Light *4 PCS Activation Indicator Light




OPERATION


a.

If the forward recognition camera determines that the possibility of a collision is high, it sends a signal to the combination meter assembly. Upon receiving this signal, the combination meter assembly indicates a warning using the PCS activation indicator light and buzzer. Details are indicated below.

·

When there is a high possibility of a collision.

PCS Activation Indicator Light Buzzer
Flashes Sounds Continuously



b.

When the system is not available, the following warning occurs to warn the driver.

·

When a system malfunction is detected.

Detail PCS Warning Light Buzzer
When the forward recognition camera detects a system malfunction. Illuminates Sounds
The illumination appears the forward recognition camera or millimeter wave radar sensor assembly determines either of the following conditionsis present:
·

Millimeter wave radar sensor assembly low voltage malfunction

·

Millimeter wave radar sensor assembly temperature malfunction

·

Dirty center mark of upper radiator grille or millimeter wave radar sensor assembly

·

Millimeter wave radar sensor assembly misaligned

·

Abnormal forward recognition camera voltage

·

Other forward recognition camera malfunction

·

Forward recognition camera temperature outside of operational range

·

Dirty or fogged windshield glass over the forward recognition camera


After these conditions have been resolved, the system will operate normally.
Illuminates -

·

When the pre-collision system is disabled.

Detail PCS Warning Light Buzzer
Pre-collision system operation is disabled. Illuminates -

·

When the VSC operation is disabled.

Detail PCS Warning light Buzzer
Pre-collision brake and pre-collision brake assist operation is disabled (the warning for when there is a high possibility of a collision is still enabled). Illuminates -