Home › Engine / Hybrid System › 1GR-FE (EMISSION CONTROL) › CANISTER
RM25T0E _51 Engine / Hybrid System _029208 1GR-FE EMISSION CONTROL _0132960 CANISTER G

1GR-FE EMISSION CONTROL  CANISTER  INSPECTION  


PROCEDURE

Hide 77740 1.INSPECT CHARCOAL CANISTER ASSEMBLY

a.

Visually check the charcoal canister assembly for cracks or damage.

If cracks or damage are found, replace the charcoal canister assembly.


b.
A126192C01
0.417,0.333 0.583,0.333 0.583,0.333 0.969,0.74 true 3.167,0.333 3,0.333 3,0.333 2.656,0.667 true 1.417,1.75 1.417,1.583 1.417,1.583 1.667,1.083 true 0.26,0.229 0.573,0.385 0.313,0.156 10 false *a 3.198,0.25 3.427,0.417 0.229,0.167 10 false *b 1.333,1.74 1.646,1.896 0.313,0.156 10 false *c
*a Port A
*b Port B
*c Port C


Using SST, inspect the charcoal canister assembly.

SST
09992-00242  

OK:
Condition Specified Condition
Close ports B and C, and then apply vacuum to port A (1.96 kPa (15 mmHg, 0.579 in.Hg)) No leak
Close port C, and then blow air into port A (4.71 kPa (0.05 kgf/cm2, 0.7 psi)) Air flows from port B
Blow air into port A (4.71 kPa (0.05 kgf/cm2, 0.7 psi)) Air flows from both ports B and C
Close port C, and then apply vacuum to port A (1.96 kPa (15 mmHg, 0.579 in.Hg)) Air flows from port B


If the result is not as specified, replace the charcoal canister assembly.