Home › Engine / Hybrid System › 1GR-FE (EMISSION CONTROL) › PCV VALVE
RM25T0E _51 Engine / Hybrid System _029208 1GR-FE EMISSION CONTROL _0132963 PCV VALVE G

1GR-FE EMISSION CONTROL  PCV VALVE  INSPECTION  


PROCEDURE

Hide 12204 1.INSPECT PCV VALVE SUB-ASSEMBLY

a.

Install a clean hose to the PCV valve sub-assembly.


b.

Check the PCV valve sub-assembly operation.

i.
A105282C01
1,1.75 1.167,1.75 1.167,1.75 1.667,1.25 true 0.844,1.656 1.156,1.813 0.313,0.156 10 false *a 2.927,1.854 3.24,2.01 0.313,0.156 10 false *b
*a Clean Hose
*b Air


Blow air into the cylinder head sub-assembly side and check that air passes through easily.

CAUTION:

Do not suck air through the PCV valve sub-assembly.

Petroleum substances inside the PCV valve sub-assembly are hazardous to your health.



ii.
A105281C01
1,1.667 1.167,1.667 1.167,1.667 1.667,1.167 true 0.844,1.563 1.156,1.719 0.313,0.156 10 false *a 0.531,0.375 0.844,0.531 0.313,0.156 10 false *b
*a Clean Hose
*b Air


Blow air into the intake air surge tank side and check that air passes through with difficulty.

If the result is not as specified, replace the PCV valve sub-assembly.



c.

Remove the clean hose from the PCV valve sub-assembly.