Wear protective gloves when removing the exhaust pipe.
The exhaust pipe is extremely hot immediately after the engine has stopped.
Confirm that the exhaust pipe has cooled down before removing it.
17430 1.REMOVE TAILPIPE ASSEMBLY
for Model Code #J71, #J76 Series:
Remove the 2 bolts and 2 nuts holding the center exhaust pipe assembly to the tailpipe assembly.
for Model Code #J78 Series:
Remove the 3 bolts and 3 nuts holding the center exhaust pipe assembly to the tailpipe assembly.
for Model Code #J79 Series:
except Double Cab:
Remove the 3 bolts and 3 nuts holding the center exhaust pipe assembly to the tailpipe assembly.
for Double Cab:
Remove the 3 bolts and 3 nuts holding the No. 2 center exhaust pipe assembly to the tailpipe assembly.
Remove the 4 nuts from the 2 exhaust pipe support cushions and then separate the tailpipe assembly from the vehicle body.
for Model Code #J78, #J79 Series:
Remove the 2 nuts from the support bracket.
Remove the gasket from the center exhaust pipe assembly.
Remove the 4 nuts and 2 exhaust pipe support cushions.
for Model Code #J76, #J78, #J79 Series:
Remove the 2 bolts and exhaust pipe damper from the tailpipe assembly.
for Model Code #J71, #J76 Series:
Remove the 2 nuts, No. 2 exhaust pipe support stay and exhaust pipe clamp from the tailpipe assembly.
17420 2.REMOVE CENTER EXHAUST PIPE ASSEMBLY
for Double Cab:
Remove the 2 nuts, No. 2 center exhaust pipe assembly and gasket.
Remove the 2 nuts and 2 bolts holding the front exhaust pipe assembly to the center exhaust pipe assembly.
Remove the 2 nuts from the exhaust pipe support cushion and then remove the center exhaust pipe assembly.
Remove the gasket from the front exhaust pipe assembly.
Remove the 2 nuts and exhaust pipe support cushion from the vehicle body.
Remove the 2 bolts and exhaust pipe damper from the center exhaust pipe assembly.
17410 3.REMOVE FRONT EXHAUST PIPE ASSEMBLY
Remove the 3 nuts holding the front exhaust pipe assembly from the exhaust manifold.
| *1 | No. 1 Exhaust Pipe Support |
| *2 | Front Exhaust Pipe Assembly |
Remove the 2 bolts holding the No. 1 exhaust pipe support bracket to the cylinder block sub-assembly, and then remove the front exhaust pipe assembly and gasket.
Remove the bolt and No. 1 exhaust pipe support bracket from the front exhaust pipe assembly.