17410 1.INSTALL FRONT EXHAUST PIPE ASSEMBLY
Temporarily install the No. 1 exhaust pipe support bracket to the front exhaust pipe assembly with the bolt.
Install a new gasket and the front exhaust pipe assembly to the exhaust manifold with 3 new nuts.
Install the No. 1 exhaust pipe support bracket to the cylinder block sub-assembly with the 2 bolts.
Tighten the bolt.
17420 2.INSTALL CENTER EXHAUST PIPE ASSEMBLY
Install the exhaust pipe damper to the center exhaust pipe assembly with 2 new bolts.
Install the exhaust pipe support cushion to the center exhaust pipe assembly with the 2 nuts.
Install the exhaust pipe support cushion to the vehicle body with the 2 nuts.
Install a new gasket and the center exhaust pipe assembly to the front exhaust pipe assembly with 2 new bolts and 2 new nuts.
for Double Cab:
Install a new gasket and the No. 2 center exhaust pipe assembly to the center exhaust pipe assembly with 2 new nuts.
17430 3.INSTALL TAILPIPE ASSEMBLY
for Model Code #J71, #J76, Series:
Install the No. 2 exhaust pipe support stay and exhaust pipe clamp to the tailpipe assembly with the 2 nuts.
for Model Code #J76, #J78, #J79 Series:
Install the exhaust pipe damper to the tailpipe assembly with 2 new bolts.
Install the 2 exhaust pipe support cushions to the tailpipe assembly with the 4 nuts.
Install the 2 exhaust pipe support cushions to the vehicle body with the 4 nuts.
for Model Code #J78, #J79 Series:
Install the support bracket with the 2 nuts.
for Model Code #J71, #J76 Series:
Install a new gasket and the tailpipe assembly to the center exhaust pipe assembly with 2 new bolts and 2 new nuts.
for Model Code #J78 Series:
Install a new gasket and the tailpipe assembly to the center exhaust pipe assembly with 3 new bolts and 3 new nuts.
for Model Code #J79 Series:
except Double Cab:
Install a new gasket and the tailpipe assembly to the center exhaust pipe assembly with 3 new bolts and 3 new nuts.
for Double Cab:
Install a new gasket and the tailpipe assembly to the No. 2 center exhaust pipe assembly with 3 new bolts and 3 new nuts.
4.INSPECT FOR EXHAUST GAS LEAK
Inspect for an exhaust gas leak from the pipe connecting area.
If gas is leaking, tighten the areas necessary to stop the leak. Replace damaged parts as necessary.