Bore all 6 cylinders to fit the O/S piston outside diameter.
Replace all the piston rings with ones to match the O/S pistons.
1.BORE CYLINDER
| *a | Distance |
Prepare 6 new O/S pistons.
Using a micrometer, measure the piston diameter at right angles to the piston pin center line where the distance from the piston head is as specified.
58.60 mm (2.3071 in.)
| Item | Specified Condition |
|---|---|
| O/S 0.50 | 94.450 to 94.480 mm (3.7185 to 3.7197 in.) |
Calculate the amount each cylinder is to be rebored as follows.
Size to be rebored = P + C - H
P = Piston diameter
C = Piston oil clearance: 0.040 to 0.060 mm (0.00157 to 0.00236 in.)
H = Allowance for honing: 0.02 mm (0.000787 in.) or less
Bore and hone the cylinders to the calculated dimensions.
0.02 mm (0.000787 in.)
Excess honing will destroy the finished roundness.