16711 1.REMOVE FAN SHROUD
13477 2.REMOVE NO. 2 CRANKSHAFT PULLEY
Remove the 6 bolts and No. 2 crankshaft pulley.
13471 3.REMOVE CRANKSHAFT PULLEY
| *a | Hold |
Using SST, hold the crankshaft pulley and loosen the pulley set bolt. Continue to loosen the bolt until only 2 or 3 threads are screwed into the crankshaft.
Using the pulley set bolt and SST, remove the crankshaft pulley, pulley set bolt and plate washer.
Remove the O-ring from the crankshaft pulley.
11302A 4.REMOVE FRONT CRANKSHAFT OIL SEAL
| *a | Hold |
Using SST remove the front crankshaft oil seal.