Home › Engine / Hybrid System › 1VD-FTV (LUBRICATION) › OIL PRESSURE SWITCH
RM25T0E _51 Engine / Hybrid System _029356 1VD-FTV LUBRICATION _0133490 OIL PRESSURE SWITCH G

1VD-FTV LUBRICATION  OIL PRESSURE SWITCH  INSPECTION  


PROCEDURE

Hide 83530 1.INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Disconnect the engine oil pressure switch assembly connector.


b.
E142242C01
0.042,0.042 0.354,0.198 0.313,0.156 10 false *a
*a Component without harness connected
(Engine Oil Pressure Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Engine ground Engine stopped Below 1 Ω
Engine idling 10 kΩ or higher



c.

Connect the engine oil pressure switch assembly connector.