Home › Engine / Hybrid System › 1VD-FTV (LUBRICATION) › OIL LEVEL SENSOR
RM25T0E _51 Engine / Hybrid System _029356 1VD-FTV LUBRICATION _0133494 OIL LEVEL SENSOR G

1VD-FTV LUBRICATION  OIL LEVEL SENSOR  INSPECTION  


PROCEDURE

Hide 89491 1.INSPECT ENGINE OIL LEVEL SENSOR

a.

Heat the switch to above 60°C (140°F) in an oil bath.


b.
A164340C01
2.344,0.833 3.063,0.49 3.063,0.49 3.219,0.49 false 2.458,1.01 3.094,1.167 3.094,1.167 3.229,1.167 false 3.26,0.417 3.396,0.594 0.135,0.177 10 false 1 3.271,1.083 3.406,1.26 0.135,0.177 10 false 2 2.969,2.521 3.281,2.677 0.313,0.156 10 false *a 2.979,2.969 3.292,3.125 0.313,0.156 10 false *b
*a ON
*b OFF


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 ON at 20°C (68°F) Below 1 Ω
OFF at 20°C (68°F) Below 1 Ω
ON at 60°C (140°F) Below 1 Ω
OFF at 60°C (140°F) 10 kΩ or higher


If the result is not as specified, replace the engine oil level sensor.