15131 1.INSPECT OIL PUMP RELIEF VALVE
Coat the oil pump relief valve with engine oil, and then check that it falls smoothly into the valve hole by its own weight.
If the valve does not fall smoothly into the valve hole, replace the oil pump relief valve. If necessary, replace the timing chain cover sub-assembly.
15102 2.INSPECT OIL PUMP ROTOR SET
| *a | Matchmark |
Place the drive rotor and driven rotor into the timing chain cover sub-assembly with the matchmarks facing upward.
Check the rotor tip clearance.
Using a feeler gauge, measure the clearance between the drive rotor and driven rotor tips.
0.06 to 0.16 mm (0.00236 to 0.00630 in.)
0.16 mm (0.00630 in.)
If the tip clearance is more than the maximum, replace the oil pump rotor set.
Check the rotor side clearance.
Using a feeler gauge and precision straightedge, measure the clearance between the rotors and precision straightedge.
0.03 to 0.09 mm (0.00118 to 0.00354 in.)
0.09 mm (0.00354 in.)
If the side clearance is more than the maximum, replace the oil pump rotor set. If necessary, replace the timing chain cover sub-assembly.
Check the rotor body clearance.
Using a feeler gauge, measure the clearance between the driven rotor and body.
0.250 to 0.325 mm (0.00984 to 0.0128 in.)
0.325 mm (0.0128 in.)
If the body clearance is more than the maximum, replace the oil pump rotor set. If necessary, replace the timing chain cover sub-assembly.