Home › Engine / Hybrid System › 1GR-FE (LUBRICATION) › OIL PUMP
RM25T0E _51 Engine / Hybrid System _029523 1GR-FE LUBRICATION _0133820 OIL PUMP A

1GR-FE LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 15131 1.INSTALL OIL PUMP RELIEF VALVE

a.

Coat the oil pump relief valve with engine oil and insert the oil pump relief valve and relief valve spring into the valve hole.


b.

Install the relief valve plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)


Hide 15115 2.INSTALL OIL PUMP COVER

a.
A134834C02
1.635,0.688 0.917,0.167 0.917,0.167 0.75,0.167 true 1.677,0.146 2.083,0.25 2.083,0.25 2.25,0.25 true 2.271,0.177 2.583,0.333 0.313,0.156 10 false *a 0.594,0.083 0.906,0.24 0.313,0.156 10 false *a
*a Matchmark


Apply engine oil to the drive rotor and driven rotor.


b.

Place the drive rotor and driven rotor into the timing chain cover sub-assembly with the matchmarks facing upward.


c.
A134832

Install the oil pump cover with the 7 bolts.

Torque:
9.1 N*m (93 kgf*cm, 81 in.*lbf)


Hide 15413 3.INSTALL OIL PUMP OUTLET PIPE

a.

Install a new O-ring to the oil pump cover.


b.

Install a new O-ring to the oil pump outlet pipe.


c.

Install the oil pump outlet pipe with the 3 bolts.

Torque:
9.1 N*m (93 kgf*cm, 81 in.*lbf)