Home › Engine / Hybrid System › 1VD-FTV (EMISSION CONTROL) › EGR VALVE (w/o DPF)
RM25T0E _51 Engine / Hybrid System _029525 1VD-FTV EMISSION CONTROL _0133829 EGR VALVE G

1VD-FTV EMISSION CONTROL  EGR VALVE  INSPECTION  


PROCEDURE

Hide 25620 1.INSPECT NO. 1 EGR VALVE ASSEMBLY

a.
A331152C02
2.833,1.417 2.667,1.417 2.667,1.417 2.365,1.01 true 2.5,1.667 2.333,1.667 2.333,1.667 2.052,1.01 true 1.083,1.833 1.25,1.833 1.25,1.833 1.406,1.01 true 2,1.833 1.833,1.833 1.833,1.833 1.719,1.01 true 0.667,1.5 0.833,1.5 0.833,1.5 1.073,1.01 true 0.323,1.417 0.781,1.615 0.458,0.198 10 false EGR 0.646,1.75 1.104,1.948 0.458,0.198 10 false EGLS 2.042,1.75 2.5,1.948 0.458,0.198 10 false VC 2.542,1.583 3,1.781 0.458,0.198 10 false E2 2.875,1.333 3.333,1.531 0.458,0.198 10 false +B 0.052,0.073 0.365,0.229 0.313,0.156 10 false *a
*a Component without harness connected
(No. 1 EGR valve assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (+B) - 5 (EGR) 20°C (68°F) 6.5 to 7.5 Ω
3 (VC) - 2 (E2) Always 2.45 to 4.55 kΩ


HINT:

The temperature indicated under "Condition" is the temperature of the No. 1 EGR valve assembly.


If the result is not as specified, replace the No. 1 EGR valve assembly.


Hide 25630 2.INSPECT NO. 2 EGR VALVE ASSEMBLY

a.
A331152C01
2.833,1.417 2.667,1.417 2.667,1.417 2.365,1.01 true 2.5,1.667 2.333,1.667 2.333,1.667 2.052,1.01 true 1.083,1.917 1.25,1.917 1.25,1.917 1.406,1.01 true 2,1.833 1.833,1.833 1.833,1.833 1.719,1.01 true 0.667,1.417 0.833,1.417 0.833,1.417 1.073,1.01 true 0.646,1.833 1.104,2.031 0.458,0.198 10 false EGLS 2.042,1.75 2.5,1.948 0.458,0.198 10 false VC 2.542,1.583 3,1.781 0.458,0.198 10 false E2 2.875,1.333 3.333,1.531 0.458,0.198 10 false +B 0.271,1.344 0.885,1.563 0.615,0.219 10 false EGR2 0.063,0.063 0.375,0.26 0.313,0.198 10 false *a
*a Component without harness connected
(No. 2 EGR valve assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (+B) - 5 (EGR2) 20°C (68°F) 6.5 to 7.5 Ω
3 (VC) - 2 (E2) Always 2.45 to 4.55 kΩ


HINT:

The temperature indicated under "Condition" is the temperature of the No. 2 EGR valve assembly.


If the result is not as specified, replace the No. 2 EGR valve assembly.