15131 1.INSPECT OIL PUMP RELIEF VALVE
Coat the oil pump relief valve with engine oil and drop it into the oil pump relief valve hole.
Check that the oil pump relief valve falls in smoothly by its own weight.
If it does not, replace the oil pump relief valve. If necessary, replace the timing gear case sub-assembly.
2.INSPECT OIL PUMP
Check the tip clearance.
Using a feeler gauge, measure the clearance between the drive rotor and driven rotor tips.
0.08 to 0.16 mm (0.00315 to 0.00630 in.)
0.21 mm (0.00827 in.)
If the tip clearance is more than the maximum, replace the timing gear case sub-assembly.
Check the body clearance.
Using a feeler gauge, measure the clearance between the timing gear case sub-assembly and driven rotor.
0.10 to 0.17 mm (0.00394 to 0.00669 in.)
0.2 mm (0.00787 in.)
If the body clearance is more than the maximum, replace the timing gear case sub-assembly.
Check the side clearance.
Using a feeler gauge and precision straightedge, measure the clearance between the rotor and precision straightedge.
0.03 to 0.09 mm (0.00118 to 0.00354 in.)
0.15 mm (0.00591 in.)
If the side clearance is more than the maximum, replace the timing gear case sub-assembly.