Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM25T0E _51 Engine / Hybrid System _029758 1GR-FE ENGINE CONTROL _0135330 CAMSHAFT OIL CONTROL VALVE G

1GR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSPECTION  


PROCEDURE

Hide 15330B 1.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 6.9 to 7.9 Ω


If the result is not as specified, replace the camshaft timing oil control valve assembly.


b.
A223678C01
2.917,0.615 3.104,0.26 3.104,0.26 3.25,0.26 true 2.792,0.615 2.604,0.26 2.604,0.26 2.458,0.26 true 2.323,0.177 2.438,0.354 0.115,0.177 10 false 1 3.271,0.177 3.396,0.354 0.125,0.177 10 false 2 0.031,0.031 0.219,0.229 0.188,0.198 10 false *a
*a Component without harness connected
(Camshaft Timing Oil Control Valve Assembly)


Connect the positive (+) lead of the battery to terminal 1 and the negative (-) lead to terminal 2 and check the movement of the valve.

OK:
Condition Specified Condition
Battery positive (+) voltage is applied Valve moves in direction of left arrow shown in illustration
Battery positive (+) voltage is cut off Valve moves in direction of right arrow shown in illustration


If the result is not as specified, replace the camshaft timing oil control valve assembly.

HINT:

If the camshaft timing oil control valve assembly cannot return properly because of foreign matter, a small pressure leak in the advanced direction may occur and a DTC may be stored.