Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › THROTTLE BODY
RM25T0E _51 Engine / Hybrid System _029758 1GR-FE ENGINE CONTROL _0135331 THROTTLE BODY G

1GR-FE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A223680C13
2.271,1.604 2.271,1.177 true 2.667,1.615 2.667,1.198 true 2.167,1.625 2.417,1.813 0.25,0.188 10 false M+ 2.604,1.625 2.854,1.813 0.25,0.188 10 false M- 0.083,0 0.292,0.198 0.208,0.198 10 false *a
*a Component without harness connected
(Throttle Body with Motor Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (M+) - 1 (M-) 20°C (68°F) 0.3 to 100 Ω


If the result is not as specified, replace the throttle body with motor assembly.