Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › KNOCK SENSOR
RM25T0E _51 Engine / Hybrid System _029758 1GR-FE ENGINE CONTROL _0135338 KNOCK SENSOR G

1GR-FE ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 120 to 280 kΩ


If the result is not as specified, replace the knock sensor.