Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › SFI SYSTEM › 2014.08–2022.09
RM25T0E _51 Engine / Hybrid System _029758 1GR-FE ENGINE CONTROL _0135343 SFI SYSTEM U

1GR-FE ENGINE CONTROL  SFI SYSTEM  TERMINALS OF ECM  


A182253E10
2.5,0.594 2.948,0.865 0.448,0.271 4.896,0.594 5.344,0.865 0.448,0.271 5.729,0.604 6.188,0.875 0.458,0.271 2.594,0.656 2.885,0.813 0.292,0.156 10 false C39 5.844,0.646 6.135,0.802 0.292,0.156 10 false A29 5.01,0.646 5.469,0.844 0.458,0.198 10 false I84 0.271,2.938 1.958,3.135 1.688,0.198 10 false *1: for LHD 5.01,0.427 5.323,0.625 0.313,0.198 10 false *1 5.865,0.427 6.177,0.625 0.313,0.198 10 false *2 0.271,3.135 1.958,3.333 1.688,0.198 10 false *2: for RHD

HINT:

The standard normal voltage between each pair of ECM terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated.

The result of checks should be compared with the standard normal voltage for that pair of terminals, displayed in the Specified Condition column.

The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I84*1-20 (BATT) - C39-81 (E1)
A29*2-20 (BATT) - C39-81 (E1)
R-B - BR Battery (for measuring the battery voltage and for the ECM memory) Always 11 to 14 V
I84*1-3 (+BM) - C39-81 (E1)
A29*2-3 (+BM) - C39-81 (E1)
R - BR Power source of throttle actuator Always 11 to 14 V
I84*1-28 (IGSW) - C39-81 (E1)
A29*2-28 (IGSW) - C39-81 (E1)
B - BR Ignition switch Ignition switch ON 11 to 14 V
I84*1-2 (+B) - C39-81 (E1)
A29*2-2 (+B) - C39-81 (E1)
L - BR Power source of ECM Ignition switch ON 11 to 14 V
I84*1-1 (+B2) - C39-81 (E1)
A29*2-1 (+B2) - C39-81 (E1)
L - BR Power source of ECM Ignition switch ON 11 to 14 V
C39-58 (OC1+) - C39-57 (OC1-) L-B - R-B Camshaft timing oil control valve (OCV) (bank 1) Ignition switch ON Pulse generation
(See waveform 1)
C39-52 (OC2+) - C39-51 (OC2-) B - B-L Camshaft timing oil control valve (OCV) (bank 2) Ignition switch ON Pulse generation
(See waveform 1)
I84*1-44 (MREL) - C39-81 (E1)
A29*2-44 (MREL) - C39-81 (E1)
W-G - BR EFI MAIN relay Ignition switch ON 11 to 14 V
C39-115 (VCV1) - C39-78 (ETHW) L - BR Power source of sensor (specific voltage) Ignition switch ON 4.5 to 5.5 V
C39-113 (VCV2) - C39-74 (ETHA) L - BR Power source of sensor (specific voltage) Ignition switch ON 4.5 to 5.5 V
C39-72 (VG) - C39-73 (E2G) G-W - G-W Mass air flow meter Idling, shift lever in neutral, A/C switch off 0.5 to 3.0 V
C39-71 (THA) - C39-74 (ETHA) Y-B - BR Intake air temperature sensor Idling, intake air temperature 20°C (68°F) 0.5 to 3.4 V
C39-79 (THW) - C39-78 (ETHW) G-B - BR Engine coolant temperature sensor Idling, engine coolant temperature 80°C (176°F) 0.2 to 1.0 V
C39-96 (VCTA) - C39-97 (ETA) L - B Power source of throttle position sensor (specific voltage) Ignition switch ON 4.5 to 5.5 V
C39-98 (VTA1) - C39-97 (ETA) R-Y - B Throttle position sensor (for engine control) Ignition switch ON, throttle valve fully closed 0.5 to 1.1 V
Ignition switch ON, throttle valve fully open 3.2 to 4.8 V
C39-99 (VTA2) - C39-97 (ETA) Y-B - B Throttle position sensor (for sensor malfunction detection) Ignition switch ON, throttle valve fully closed 2.1 to 3.1 V
Ignition switch ON, throttle valve fully open 4.6 to 5.0 V
I84*1-55 (VPA) - I84*1-59 (EPA)
A29*2-55 (VPA) - A29*2-59 (EPA)
L-R - W Accelerator pedal position sensor (for engine control) Ignition switch ON, accelerator pedal fully released 0.5 to 1.1 V
Ignition switch ON, accelerator pedal fully depressed 2.6 to 4.5 V
I84*1-56 (VPA2) - I84*1-60 (EPA2)
A29*2-56 (VPA2) - A29*2-60 (EPA2)
R-B - BR Accelerator pedal position sensor (for sensor malfunction detection) Ignition switch ON, accelerator pedal fully released 1.2 to 2.0 V
Ignition switch ON, accelerator pedal fully depressed 3.4 to 4.7 V
I84*1-57 (VCPA) - I84*1-59 (EPA)
A29*2-57 (VCPA) - A29*2-59 (EPA)
BR-W - W Power source of accelerator pedal position sensor (for VPA) Ignition switch ON 4.5 to 5.5 V
I84*1-58 (VCP2) - I84*1-60 (EPA2)
A29*2-58 (VCP2) - A29*2-60 (EPA2)
V - BR Power source of accelerator pedal position sensor (for VPA2) Ignition switch ON 4.5 to 5.5 V
C39-86 (HA1A) - C39-23 (E04) L-R - W-B Air fuel ratio (A/F) sensor heater Idling Below 3.0 V
C39-109 (HA2A) - C39-46 (E05) G - W-B Ignition switch ON 11 to 14 V
C39-93 (A1A+) - C39-81 (E1) G - BR A/F sensor Ignition switch ON 3.3 V*3
C39-120 (A2A+) - C39-81 (E1) V - BR A/F sensor Ignition switch ON 3.3 V*3
C39-116 (A1A-) - C39-81 (E1) R - BR A/F sensor Ignition switch ON 2.9 V*3
C39-119 (A2A-) - C39-81 (E1) P - BR A/F sensor Ignition switch ON 2.9 V*3
C39-48 (HT1B) - C39-104 (E03) G - W-B Heated oxygen sensor heater Idling Below 3.0 V
C39-47 (HT2B) - C39-104 (E03) B - W-B Ignition switch ON 11 to 14 V
C39-88 (OX1B) - C39-65 (EX1B) B - B-R Heated oxygen sensor Engine speed maintained at 2500 rpm for 2 minutes after warming up engine Pulse generation
(See waveform 2)
C39-87 (OX2B) - C39-64 (EX2B) B - BR
C39-45 (#10) - C39-22 (E01) R-L - W-B Fuel injector Ignition switch ON 11 to 14 V
C39-85 (#20) - C39-22 (E01) L - W-B
C39-44 (#30) - C39-22 (E01) R-B - W-B
C39-84 (#40) - C39-22 (E01) Y - W-B Idling Pulse generation
(See waveform 3)
C39-43 (#50) - C39-22 (E01) G - W-B
C39-83 (#60) - C39-22 (E01) R - W-B
C39-95 (KNK1) - C39-94 (EKNK) B - W Knock sensor (bank 1) Engine speed maintained at 4000 rpm after warming up engine Pulse generation
(See waveform 4)
C39-118 (KNK2) - C39-117 (EKN2) G - R Knock sensor (bank 2) Engine speed maintained at 4000 rpm after warming up engine Pulse generation
(See waveform 4)
C39-69 (VV1+) - C39-92 (VV1-) R - L-R Variable Valve Timing (VVT) sensor (bank 1) Idling Pulse generation
(See waveform 5)
C39-67 (VV2+) - C39-90 (VV2-) P - G Variable Valve Timing (VVT) sensor (bank 2) Idling Pulse generation
(See waveform 5)
C39-110 (NE+) - C39-111 (NE-) B - W Crankshaft position sensor Idling Pulse generation
(See waveform 5)
C39-40 (IGT1) - C39-81 (E1) B-R - BR Ignition coil Assembly (ignition signal) Idling Pulse generation
(See waveform 6)
C39-39 (IGT2) - C39-81 (E1) R - BR
C39-38 (IGT3) - C39-81 (E1) B - BR
C39-37 (IGT4) - C39-81 (E1) L-W - BR
C39-36 (IGT5) - C39-81 (E1) G - BR
C39-35 (IGT6) - C39-81 (E1) G - BR
C39-106 (IGF) - C39-81 (E1) G-B - BR Ignition coil Assembly (ignition confirmation signal) Ignition switch ON 4.5 to 5.5 V
Idling Pulse generation
(See waveform 6)
C39-108 (PRG) - C39-81 (E1) L-B - BR Purge VSV Ignition switch ON 11 to 14 V
Idling Pulse generation
(See waveform 7)
I84*1-8 (SPD) - C39-81 (E1)
A29*2-8 (SPD) - C39-81 (E1)
G - BR Speed signal from combination meter Ignition switch ON, wheel rotated slowly Pulse generation
(See waveform 8)
I84*1-48 (STA) - C39-81 (E1)
A29*2-48 (STA) - C39-81 (E1)
B-W - BR Starter signal Cranking 11 to 14 V
I84*1-36 (STP) - C39-81 (E1)
A29*2-36 (STP) - C39-81 (E1)
W - BR Stop light switch Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V
I84*1-35 (ST1-) - C39-81 (E1)
A29*2-35 (ST1-) - C39-81 (E1)
R-L - BR Stop light switch (opposite to STP terminal) Ignition switch ON, brake pedal depressed Below 1.5 V
Ignition switch ON, brake pedal released 7.5 to 14 V
C39-19 (M+) - C39-20 (ME01) R - BR Throttle actuator Idling with warm engine Pulse generation
(See waveform 9)
C39-18 (M-) - C39-20 (ME01) G - BR Throttle actuator Idling with warm engine Pulse generation
(See waveform 10)
I84*1-7 (FC) - C39-81 (E1)
A29*2-7 (FC) - C39-81 (E1)
R-W - BR C/OPN relay operation signal (fuel pump control) Ignition switch ON 11 to 14 V
Idling with warm engine Below 1.5 V
I84*1-24 (W) - C39-81 (E1)
A29*2-24 (W) - C39-81 (E1)
R-W - BR MIL Ignition switch ON Below 3.0 V
Idling 11 to 14 V
I84*1-27 (TC) - C39-81 (E1)
A29*2-27 (TC) - C39-81 (E1)
G - BR Terminal TC of DLC3 Ignition switch ON 11 to 14 V
I84*1-15 (TACH) - C39-81 (E1)
A29*2-15 (TACH) - C39-81 (E1)
B - BR Engine speed Idling Pulse generation
(See waveform 11)
C39-107 (ACIS) - C39-81 (E1) L-B - BR VSV for ACIS Ignition switch ON 11 to 14 V
C39-70 (PSW) - C39-81 (E1) L - BR Power Steering Pressure Switch Ignition switch ON 11 to 14 V
I84*1-41 (CANH) - C39-81 (E1)
A29*2-41 (CANH) - C39-81 (E1)
B - BR CAN communication line Ignition switch ON Pulse generation
(See waveform 12)
I84*1-49 (CANL) - C39-81 (E1)
A29*2-49 (CANL) - C39-81 (E1)
W - BR CAN communication line Ignition switch ON Pulse generation
(See waveform 13)
C39-59 (FPR) - C39-81 (E1) G-W - BR Fuel pump control Ignition switch ON 11 to 14 V
Idling Below 1.5 V

HINT:
·

*1: for LHD

·

*2: for RHD

·

*3: The ECM terminal voltage is constant regardless of theoutput voltage from the sensor.



WAVEFORM 1


A093229E60
2.063,1.854 2.896,2 0.833,0.146 10 false 1 msec./DIV. 0.542,0.188 1.083,0.333 0.542,0.146 10 false 5 V/DIV. 0.719,1.146 1.115,1.333 0.396,0.188 10 false GND

Camshaft Timing Oil Control Valve (OCV)
ECM Terminal Name Between OC1+ and OC1- or OC2+ and OC2-
Tester Range 5 V/DIV., 1 msec./DIV.,
Condition Idling


WAVEFORM 2


A088863E65
0.354,0.156 1.052,0.354 0.698,0.198 10 false 0.2 V/DIV. 0.813,1.365 1.177,1.573 0.365,0.208 10 false GND 2.063,1.865 3.052,2.063 0.99,0.198 10 false 200 msec./DIV.

Heated Oxygen Sensor
ECM Terminal Name Between OX1B and EX1B or OX2B and EX2B
Tester Range 0.2 V/DIV., 200 msec./DIV.
Condition Engine speed maintained at 2500 rpm for 2 minutes after warming up engine

HINT:

In the Data List, item O2S B1S2 or O2S B2S2 shows the ECM input values from the heated oxygen sensor.



WAVEFORM 3


G035622E20
0.417,0.271 1.052,0.417 0.635,0.146 10 false 30 V/DIV. 1.896,1.906 2.823,2.052 0.927,0.146 10 false 20 msec./DIV. 0.542,1.219 0.948,1.427 0.406,0.208 10 false GND

Fuel Injector
ECM Terminal Name Between #10 (to #60) and E01
Tester Range 30 V/DIV., 20 msec./DIV.
Condition Idling

HINT:

The wavelength becomes shorter as the engine speed increases.



WAVEFORM 4


A185976E03
0.146,0.167 1.698,0.365 1.552,0.198 10 false KNK1 Signal Waveform 2.552,0.823 3.229,1.01 0.677,0.188 10 false 1 V/DIV. 2.646,1.594 3.167,1.781 0.521,0.188 10 false GND 0.396,2.552 1.323,2.74 0.927,0.188 10 false 1 msec./DIV.

Knock Sensor
ECM Terminal Name Between KNK1 and EKNK or KNK2 and EKN2
Tester Range 1 V/DIV., 0.01 to 1 msec./DIV.
Condition Engine speed maintained at 4000 rpm after warming up engine

HINT:
·

The wavelength becomes shorter as the engine speed increases.

·

The waveforms and amplitudes displayed on the tester differ slightly depending on the vehicle.




WAVEFORM 5


A122767E21
0.198,0.656 0.427,0.823 0.229,0.167 10 false NE 0.125,1.125 0.427,1.281 0.302,0.156 10 false VV1 0.125,1.51 0.427,1.656 0.302,0.146 10 false VV2 2.896,0.635 3.229,0.781 0.333,0.146 10 false GND 2.896,1.583 3.229,1.729 0.333,0.146 10 false GND 2.896,1.208 3.229,1.354 0.333,0.146 10 false GND 1.823,1.885 2.792,2.042 0.969,0.156 10 false 20 msec./DIV 2.75,0.344 3.26,0.5 0.51,0.156 10 false 5 V/DIV 0.042,0.021 2.365,0.208 2.323,0.188 10 false VV1, VV2 and NE Signal Waveforms 0.063,0.396 0.292,0.563 0.229,0.167 10 false (a) 0.073,0.906 0.302,1.073 0.229,0.167 10 false (b)

Crankshaft Position Sensor and VVT Sensor
ECM Terminal Name (a) Between NE+ and NE-
(b) Between VV1+ and VV1- or VV2+ and VV2-
Tester Range 5 V/DIV., 20 msec./DIV.
Condition Idling

HINT:

The wavelength becomes shorter as the engine speed increases.



WAVEFORM 6


A185974E02
0.531,0.479 2.521,0.656 1.99,0.177 10 false IGT and IGF Signal Waveforms 2.74,1.24 3.281,1.417 0.542,0.177 10 false 2 V/DIV. 2.875,1.865 3.26,2.094 0.385,0.229 10 false GND 2.896,2.74 3.292,2.958 0.396,0.219 10 false GND 0.521,2.948 1.427,3.115 0.906,0.167 10 false 20 msec./DIV. 0.229,1.625 0.427,1.823 0.198,0.198 10 false (a) 0.24,2.396 0.448,2.563 0.208,0.167 10 false (b)

Ignition coil Assembly Signal (IGT and IGF Signal)
ECM Terminal Name (a) Between IGT (1 to 6) and E1
(b) Between IGF and E1
Tester Range 2 V/DIV., 20 msec./DIV.
Condition Idling

HINT:

The wavelength becomes shorter as the engine speed increases.



WAVEFORM 7


A218020E16
2.677,0.177 3.302,0.323 0.625,0.146 10 false 10 V/DIV. 2.802,0.927 3.146,1.167 0.344,0.24 10 false GND 1.188,1.792 2.323,1.958 1.135,0.167 10 false 20 msec./DIV.

Purge VSV
ECM Terminal Name Between PRG and E1
Tester Range 10 V/DIV., 20 msec./DIV.
Condition Idling

HINT:

If the waveform is not similar to the illustration, check the waveform again after idling for 10 minutes or more.



WAVEFORM 8


A093224E38
0.417,0.177 0.979,0.375 0.563,0.198 10 false 2 V/DIV. 0.719,1.167 1.365,1.365 0.646,0.198 10 false GND 2.125,1.896 3.063,2.094 0.938,0.198 10 false 20 msec./DIV.

Vehicle Speed Signal
ECM Terminal Name Between SPD and E1
Tester Range 2 V/DIV., 20 msec./DIV.
Condition Ignition switch ON, wheel rotated slowly

HINT:

The wavelength becomes shorter as the vehicle speed increases.



WAVEFORM 9


A208000E41
2.854,0.969 3.385,1.135 0.531,0.167 10 false GND 2.635,0.219 3.177,0.365 0.542,0.146 10 false 5 V/DIV. 1.323,1.802 2.531,2 1.208,0.198 10 false 1 msec./DIV.

Throttle Actuator Positive Terminal
ECM Terminal Name Between M+ and ME01
Tester Range 5 V/DIV., 1 msec./DIV.
Condition Idling with warm engine

HINT:

The duty ratio varies depending on the throttle actuator operation.



WAVEFORM 10


A093274E52
0.49,0.146 1.115,0.344 0.625,0.198 10 false 5 V/DIV. 0.781,1.333 1.396,1.531 0.615,0.198 10 false GND 2.271,1.865 3.219,2.063 0.948,0.198 10 false 1 msec./DIV.

Throttle Actuator Negative Terminal
ECM Terminal Name Between M- and ME01
Tester Range 5 V/DIV., 1 msec./DIV.
Condition Idling with warm engine

HINT:

The duty ratio varies depending on the throttle actuator operation.



WAVEFORM 11


A093225E50
0.302,0.146 0.885,0.344 0.583,0.198 10 false 5 V/DIV. 0.708,1.188 1.344,1.385 0.635,0.198 10 false GND 2.125,1.906 3.073,2.104 0.948,0.198 10 false 10 msec./DIV.

Engine Speed Signal
ECM Terminal Name Between TACH and E1
Tester Range 5 V/DIV., 10 msec./DIV.
Condition Idling

HINT:

The wavelength becomes shorter as the engine speed increases.



WAVEFORM 12


A086154E93
2.74,0.083 3.281,0.281 0.542,0.198 10 false 1 V/DIV. 1.135,1.938 2.01,2.146 0.875,0.208 10 false 10 μsec./DIV.

CAN Communication Signal (Reference)
ECM Terminal Name Between CANH and E1
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON

HINT:

The wavelength varies depending on the CAN communication signal.



WAVEFORM 13


A086155E82
2.74,0.083 3.292,0.281 0.552,0.198 10 false 1 V/DIV. 1.281,1.906 2.177,2.104 0.896,0.198 10 false 10 μsec./DIV.

CAN Communication Signal (Reference)
ECM Terminal Name Between CANL and E1
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON

HINT:

The wavelength varies depending on the CAN communication signal.