Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › DIESEL THROTTLE BODY
RM25T0E _51 Engine / Hybrid System _029760 1VD-FTV ENGINE CONTROL _0135353 DIESEL THROTTLE BODY A

1VD-FTV ENGINE CONTROL  DIESEL THROTTLE BODY  INSTALLATION  


PROCEDURE

Hide 26100G 1.INSTALL DIESEL THROTTLE BODY ASSEMBLY (for Bank 2)

a.

Install a new gasket to the intake pipe.


b.

Install the diesel throttle body assembly with the 2 bolts and 2 nuts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


c.

Connect the 2 connectors to the diesel throttle body assembly.


Hide 26100G 2.INSTALL DIESEL THROTTLE BODY ASSEMBLY (for Bank 1)

a.

Install a new gasket to the intake pipe.


b.

Install the diesel throttle body assembly with the 2 bolts and 2 nuts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


c.

Connect the 2 connectors to the diesel throttle body assembly.


Hide 17972 3.INSTALL NO. 2 COOL AIR INLET

A163129C01
0.75,0.333 1,0.333 1,0.333 1.333,1.417 true 0.823,2.5 1.073,2.5 1.073,2.5 1.396,1.542 true 0.552,0.229 0.813,0.427 0.26,0.198 10 false *a 2.49,0.5 2.75,0.729 0.26,0.229 10 true *b 0.604,2.406 0.823,2.625 0.219,0.219 10 true *c
*a Embossed Mark
*b Front
*c Paint Mark


a.

Insert the No. 2 cool air inlet to the diesel throttle body assembly.


b.

Align the embossed mark of the diesel throttle body assembly within the paint mark of the No. 4 air hose.


c.
A163828C01
0.469,1.24 0.708,1.438 0.24,0.198 10 false *a
*a 7 to 11 mm (0.276 to 0.433 in.)


Tighten the hose clamp so that it is 7 to 11 mm (0.276 to 0.433 in.) from the end of the hose as shown in the illustration.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


Hide 17971 4.INSTALL NO. 1 COOL AIR INLET

A163127C01
2.75,2.75 2.5,2.75 2.5,2.75 2.073,1.708 true 2.583,0.75 2.333,0.75 2.333,0.75 2,1.625 true 2.813,2.656 3.094,2.875 0.281,0.219 10 false *a 0.271,2.479 0.479,2.698 0.208,0.219 10 true *b 2.635,0.656 2.896,0.885 0.26,0.229 10 true *c
*a Embossed Mark
*b Front
*c Paint Mark


a.

Insert the No. 1 cool air inlet to the diesel throttle body assembly.


b.

Align the embossed mark of the diesel throttle body assembly within the paint mark of the No. 4 air hose.


c.
A163828C01
0.469,1.24 0.708,1.438 0.24,0.198 10 false *a
*a 7 to 11 mm (0.276 to 0.433 in.)


Tighten the hose clamp so that it is 7 to 11 mm (0.276 to 0.433 in.) from the end of the hose as shown in the illustration.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


Hide 17940D 5.INSTALL INTERCOOLER ASSEMBLY