Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › DIESEL THROTTLE BODY
RM25T0E _51 Engine / Hybrid System _029760 1VD-FTV ENGINE CONTROL _0135353 DIESEL THROTTLE BODY G

1VD-FTV ENGINE CONTROL  DIESEL THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 26100G 1.INSPECT DIESEL THROTTLE BODY ASSEMBLY

A115808N01
0.271,1.333 0.271,1.115 0.271,1.115 0.542,0.625 true 0.76,1.344 0.76,0.677 true 1.688,0.323 1.5,0.323 1.5,0.323 1.042,0.583 true 0.135,1.365 0.573,1.563 0.438,0.198 10 false GND 0.656,1.365 1.01,1.615 0.354,0.25 10 false +B 1.75,0.25 2.198,0.438 0.448,0.188 10 false DUTY

a.

Inspect the throttle control motor.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (DUTY) - Body ground Always 10 kΩ or higher
2 (+B) - Body ground Always 10 kΩ or higher
3 (GND) - Body ground Always 10 kΩ or higher
2 (+B) - 1 (DUTY) Always 10 kΩ or higher
1 (DUTY) - 3 (GND) Always 10 kΩ or higher


If the result is not as specified, replace the diesel throttle body assembly.