Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR
RM25T0E _51 Engine / Hybrid System _029760 1VD-FTV ENGINE CONTROL _0135356 ENGINE COOLANT TEMPERATURE SENSOR A

1VD-FTV ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89422 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

a.

Install a new gasket to the engine coolant temperature sensor.


b.

Using a 19 mm deep socket wrench, install the engine coolant temperature sensor to the water outlet.

Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)


c.

Connect the connector to the engine coolant temperature sensor.