Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › INTAKE AIR TEMPERATURE SENSOR
RM25T0E _51 Engine / Hybrid System _029760 1VD-FTV ENGINE CONTROL _0135357 INTAKE AIR TEMPERATURE SENSOR A

1VD-FTV ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89424D 1.INSTALL INTAKE AIR TEMPERATURE SENSOR

a.

Install a new gasket to the intake air temperature sensor.


b.

Using a 22 mm deep socket wrench, install the intake air temperature sensor to the intercooler.

Torque:
29.4 N*m (300 kgf*cm, 22 ft.*lbf)

NOTICE:

Do not use a tool such as an impact wrench or the equivalent.



c.

Connect the connector to the intake air temperature sensor.