78110K 1.INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Engine and ECT/ Data List / Accel Sens. No.1 Volt % and Accel Sens. No.2 Volt %.
| Tester Display |
|---|
| Accel Sens. No.1 Volt % |
| Accel Sens. No.2 Volt % |
Read the value displayed on the GTS.
| Tester Display | Condition | Specified Condition |
|---|---|---|
| Accel Sens. No.1 Volt % | Released | 10 to 22% |
| Depressed | 52 to 90% | |
| Accel Sens. No.2 Volt % | Released | 24 to 40% |
| Depressed | 68 to 99% |
If the result is not as specified, check the accelerator pedal sensor assembly, wire harness or ECM.