Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › ACCELERATOR PEDAL
RM25T0E _51 Engine / Hybrid System _029760 1VD-FTV ENGINE CONTROL _0135358 ACCELERATOR PEDAL A

1VD-FTV ENGINE CONTROL  ACCELERATOR PEDAL  INSTALLATION  


PROCEDURE

Hide 78110K 1.INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

Avoid physical shocks to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.

·

This accelerator pedal sensor assembly does not require lubrication.

·

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.



a.

Connect the tip of the accelerator pedal sensor assembly to the bracket.


b.

Install the accelerator pedal sensor assembly with the 2 nuts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


c.

Connect the connector to the accelerator pedal sensor assembly.