Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › ACCELERATOR PEDAL
RM25T0E _51 Engine / Hybrid System _029760 1VD-FTV ENGINE CONTROL _0135358 ACCELERATOR PEDAL A

1VD-FTV ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 78110K 1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

Avoid physical shocks to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.

·

This accelerator pedal does not require lubrication.

·

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.



a.
A221431

Disconnect the connector from the accelerator pedal sensor assembly.


b.

Remove the 2 nuts and accelerator pedal sensor assembly.