22204 1.INSPECT MASS AIR FLOW METER
Turn the ignition switch to ON (do not start the engine).
Enter the following menus: Power train / Engine and ECT / Data List / MAF.
| Tester Display |
|---|
| MAF |
|
Air |
Blow air into the mass air flow meter and check that the value of mass air flow sensor fluctuates.
The value changes.
If the result is not as specified, clean the mass air flow meter sub-assembly.
Click hereEngine / Hybrid System>1VD-FTV (ENGINE CONTROL)>MASS AIR FLOW METER>INSPECTION
After cleaning (air blowing) the mass air flow meter, perform an on-vehicle inspection of the mass air flow meter again and replace the mass air flow meter if the result is not as specified.