Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › POWER STEERING OIL PRESSURE SWITCH › 2014.08–2019.09
RM25T0E _51 Engine / Hybrid System _029760 1VD-FTV ENGINE CONTROL _0135362 POWER STEERING OIL PRESSURE SWITCH A

1VD-FTV ENGINE CONTROL  POWER STEERING OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 89438B 1.INSTALL POWER STEERING OIL PRESSURE SWITCH

a.

Apply a light coat of engine oil to the O-ring of the power steering oil pressure switch.

HINT:
·

When reusing the power steering oil pressure switch, inspect the O-ring.

·

If the O-ring has scratches or cuts, replace the power steering oil pressure switch.




b.

Install the power steering oil pressure switch to the pressure feed tube assembly.

Torque:
20.6 N*m (210 kgf*cm, 15 ft.*lbf)


c.

Connect the connector to the power steering oil pressure switch.


Hide 2.ADD POWER STEERING FLUID

Hide 3.BLEED AIR FROM POWER STEERING FLUID