Home › Engine / Hybrid System › 1HZ (EMISSION CONTROL) › EMISSION CONTROL ECU
RM25T0E _51 Engine / Hybrid System _029769 1HZ EMISSION CONTROL _0135393 EMISSION CONTROL ECU A

1HZ EMISSION CONTROL  EMISSION CONTROL ECU  INSTALLATION  


PROCEDURE

Hide 89551 1.INSTALL EMISSION CONTROL ECU

a.

Install the 3 emission control ECU brackets to the emission control ECU with the 6 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


b.

Install the emission control ECU to the instrument panel reinforcement assembly with the 3 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


c.

Connect the 2 emission control ECU connectors.


Hide 55433B 2.INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

Hide 55550 3.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY