Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL SUPPLY PUMP (w/o DPF)
RM25T0E _51 Engine / Hybrid System _029770 1VD-FTV FUEL _0135396 FUEL SUPPLY PUMP G

1VD-FTV FUEL  FUEL SUPPLY PUMP  INSPECTION  


PROCEDURE

Hide 22100 1.INSPECT FUEL SUPPLY PUMP ASSEMBLY

a.

Inspect the suction control valve.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 1.9 to 2.3 Ω


If the result is not as specified, replace the fuel supply pump assembly.