89871A 1.INSTALL INJECTOR DRIVER
Install the No. 1 injector driver and No. 2 injector driver bracket to the bracket with the 4 screws.
Install the No. 2 injector driver and No. 2 injector driver bracket to the No. 1 injector driver bracket with the 4 screws.
Install the No. 2 injector driver with the 3 bolts .
Install the injector driver assembly with the 3 bolts.
Tighten the bolts in the order shown in the illustration.
| *a | Protective Tube |
Connect the 4 injector driver connectors.
Connect the wire harness covered with a protective tube to the No. 1 injector driver.
Attach 3 clamps and connect the 4 engine room main wire connectors.