89871A 1.REMOVE INJECTOR DRIVER
Detach the 3 clamps and disconnect the 4 engine room main wire connectors.
Disconnect 4 injector driver connectors.
Remove the 3 bolts and injector driver assembly.
Remove the 3 bolts and No. 2 injector driver.
Remove the 4 screws, No. 2 injector driver and No. 2 injector driver bracket from the No. 1 injector driver bracket.
Remove the 4 screws, No. 1 injector driver and No. 2 injector driver bracket from the bracket.