1.DRAIN FUEL
Remove the fuel tank drain plug and gasket, and then drain the fuel.
Install a new gasket and the fuel tank drain plug.
2.REMOVE EXHAUST PIPE
for 5 Door:
Click hereEngine / Hybrid System>1VD-FTV (INTAKE / EXHAUST)>EXHAUST PIPE (for 5 Door)>REMOVAL
except 5 Door:
Click hereEngine / Hybrid System>1VD-FTV (INTAKE / EXHAUST)>EXHAUST PIPE (except 5 Door)>REMOVAL
37110 3.REMOVE PROPELLER SHAFT ASSEMBLY
4.REMOVE FUEL TUBE PROTECTOR
Remove the 4 bolts and fuel tube protector.
77206C 5.DISCONNECT NO. 2 FUEL MAIN TUBE SUB-ASSEMBLY
for Single Tank Type:
Remove the 3 bolts.
Slide the 6 clamps and disconnect the 6 fuel hoses from the No. 2 fuel main tube sub-assembly.
Disconnect the No. 2 fuel main tube sub-assembly from the fuel tube clamps.
for Double Tank Type:
Remove the 3 bolts.
Slide the 8 clamps and disconnect the 8 fuel hoses from the No. 2 fuel main tube sub-assembly.
Disconnect the No. 2 fuel main tube sub-assembly from the fuel tube clamps.
77207B 6.REMOVE NO. 3 FUEL MAIN TUBE SUB-ASSEMBLY
for Single Tank Type:
Slide the 4 clamps and disconnect the 4 fuel hoses from the No. 3 fuel main tube sub-assembly.
Remove the 2 bolts and No. 3 fuel main tube sub-assembly.
for Double Tank Type:
Slide the 6 clamps and disconnect the 6 fuel hoses from the No. 3 fuel main tube sub-assembly.
Remove the 2 bolts and No. 3 fuel main tube sub-assembly.
7.DISCONNECT FUEL MAIN HOSE
Slide the clamp and disconnect the fuel main hose from the fuel suction tube assembly.
8.DISCONNECT FUEL RETURN HOSE
Slide the clamp and disconnect the fuel return hose from the fuel suction tube assembly.
77213 9.DISCONNECT INLET FUEL HOSE
Loosen the clamp and disconnect the inlet fuel hose from the fuel tank assembly.
77100D 10.DISCONNECT FUEL BREATHER HOSE
Slide the clamp and disconnect the fuel breather hose from the fuel tank assembly.
77100 11.REMOVE FUEL TANK ASSEMBLY
Disconnect the fuel sender gauge connector.
Set an engine lifter underneath the fuel tank assembly.
Remove the 2 bolts and disconnect the 2 fuel tank bands.
Slightly lower the engine lifter.
Remove the fuel tank protector from the fuel tank assembly.
77026A 12.REMOVE NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY
Remove the 8 screws, 2 nuts and No. 1 fuel evaporation tube sub-assembly from the fuel tank assembly.
Remove the 2 gaskets from the No. 1 evaporation tube sub-assembly.
77380 13.REMOVE FUEL CUT OFF VALVE ASSEMBLY
Remove the fuel cut off cut off valve assembly from the fuel tank assembly.
77420 14.REMOVE NO. 2 FUEL CUT OFF VALVE ASSEMBLY
Remove the No. 2 fuel cut off valve assembly from the fuel tank assembly.
15.REMOVE FUEL SENDER GAUGE ASSEMBLY
16.REMOVE FUEL SUCTION TUBE ASSEMBLY
Remove the 5 screws and fuel suction tube assembly from the fuel tank assembly.
Remove the gasket from the fuel suction tube assembly.
77011 17.REMOVE LOWER FUEL TANK FILLER PIPE SUB-ASSEMBLY
Remove the 6 screws and lower fuel tank filler pipe sub-assembly.
Remove the gasket from the lower fuel tank filler pipe sub-assembly.