Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL TANK(for 130 L Tank) › 2014.08–2016.08
RM25T0E _51 Engine / Hybrid System _029770 1VD-FTV FUEL _0135404 FUEL TANK(for 130 L Tank) A

1VD-FTV FUEL  FUEL TANK(for 130 L Tank)  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT FUEL RETURN HOSE

a.
A290423

Slide the clamp and disconnect the fuel return hose from the fuel suction tube assembly.


Hide 2.DISCONNECT FUEL MAIN HOSE

a.
A290424

Slide the clamp and disconnect the fuel main hose from the fuel suction tube assembly.


Hide 77213 3.DISCONNECT INLET FUEL HOSE

a.
A284618

Loosen the clamp and disconnect the inlet fuel hose from the lower fuel tank filler pipe sub-assembly.


Hide 77100D 4.DISCONNECT FUEL BREATHER HOSE

a.
A289093

Slide the clamp and disconnect the fuel breather hose from the fuel tank assembly.


Hide 77100 5.REMOVE FUEL TANK ASSEMBLY

a.
A290419

Disconnect the fuel sender gauge connector.


b.
A290422

Detach the wire harness clamp from the frame.


c.

Set an engine lifter underneath the fuel tank assembly.


d.
A284620

Remove the 2 bolts, 2 pins and 2 fuel tank bands.


e.

Slightly lower the engine lifter.


f.

Remove the No. 1 fuel tank protector sub-assembly.


Hide 7.REMOVE FUEL SUCTION TUBE ASSEMBLY

a.
A289052

Remove the nut.


b.

Remove the 7 screws and fuel suction tube assembly.


c.

Remove the gasket from the fuel suction tube assembly.


Hide 77278A 8.REMOVE FUEL EVAPORATION HOSE

a.
A284621

Detach the clamp from the fuel tank assembly.


b.

Slide the clamp and remove the fuel evaporation hose from the fuel tank assembly.


Hide 77011 9.REMOVE LOWER FUEL TANK FILLER PIPE SUB-ASSEMBLY

a.
A289045

Remove the 6 screws and lower fuel tank filler pipe sub-assembly from the fuel tank assembly.


b.

Remove the gasket from the lower fuel tank filler pipe sub-assembly.