Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL PUMP RESISTOR › 2014.08–2022.09
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135861 FUEL PUMP RESISTOR A

1GR-FE FUEL  FUEL PUMP RESISTOR  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, watching time may be required before disconnecting the cable from the battery teminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 3.DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

Hide 74481 4.REMOVE BATTERY HOLD DOWN CLAMP

a.
A219001

for Model Code #J79 Series:

Remove the bolt and loosen the 2 nuts.


b.

Remove the bolt and loosen the nut.


c.

Detach the hook of the battery hold down clamp from the front battery bracket, and then remove the battery hold down clamp.


Hide 28800 5.REMOVE BATTERY

Hide 28380A 6.REMOVE FUEL PUMP RESISTOR

a.
A220684

Disconnect the fuel pump resistor connector from the fuel pump resistor.


b.

Remove the bolt and fuel pump resistor.