77720E 1.INSPECT FUEL TANK SOLENOID RETURN VALVE ASSEMBLY
| *a | Component without harness connected (Fuel Tank Solenoid Return Valve Assembly) |
| *b | Body ground |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - Body ground | Always | 1 MΩ or higher |
| 2 - Body ground | ||
| 1 - 2 | 20°C (68°F) | 12 to 15 Ω |
If the result is not as specified, replace the fuel tank solenoid return valve assembly.
Inspect the valve operation.
| *a | port B |
| *b | port C |
|
Air |
Check that air flows from port B to port C.
| *a | Component without harness connected (Fuel Tank Solenoid Return Valve Assembly) |
| *b | port A |
| *c | port B |
|
Air |
Apply battery voltage across the terminals.
Check that air flows from port B to port A.
If the result is not as specified, replace the fuel tank solenoid return valve assembly.