Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for Double Tank Type) › 2014.08–2016.08
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135868 FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type) G

1GR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type)  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)

a.
A211816C02
0.479,2.313 0.979,2.313 true 1.323,4.281 1.823,4.281 true 0.333,2.24 0.656,2.469 0.323,0.229 10 false F 1.156,4.198 1.479,4.427 0.323,0.229 10 false E 0.052,0.052 0.375,0.281 0.323,0.229 10 false *a
*a Component without harness connected
(Fuel Sender Gauge Assembly)


Check the fuel sender gauge resistance.

i.

Check that the float moves smoothly between F (upper end) and E (lower end).


ii.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 F (Upper End) 12 to 18 Ω
2 - 3 E (Lower End) 405 to 415 Ω


If the result is not as specified, replace the fuel sender gauge assembly.