Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for 90 L Tank Carried in Middle) › 2014.08–2016.08
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135869 FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Middle) G

1GR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Middle)  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

A211817C02
1.219,4.313 1.885,4.313 true 0.417,2.24 1.083,2.24 true 0.052,0.052 0.469,0.365 0.417,0.313 10 false *a 1.052,4.24 1.469,4.552 0.417,0.313 10 false E 0.271,2.156 0.688,2.469 0.417,0.313 10 false F
*a Component without harness connected
(Fuel Sender Gauge Assembly)


a.

Check the fuel sender gauge resistance.

i.

Check that the float moves smoothly between F (upper end) and E (lower end).


ii.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 F (Upper End) 12 to 18 Ω
1 - 2 E (Lower End) 405 to 415 Ω


If the result is not as specified, replace the fuel sender gauge assembly.