Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for 90 L Tank Carried in Rear) › 2014.08–2016.08
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135870 FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Rear) G

1GR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Rear)  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

A211816C03
0.469,2.333 0.969,2.333 true 0.052,0.052 0.385,0.292 0.333,0.24 10 false *a 0.344,2.26 0.677,2.5 0.333,0.24 10 false F 1.177,4.208 1.51,4.448 0.333,0.24 10 false E
*a Component without harness connected
(Fuel Sender Gauge Assembly)


a.

Check the fuel sender gauge resistance.

i.

Check that the float moves smoothly between F (upper end) and E (lower end).


ii.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 F (Upper End) 12 to 18 Ω
2 - 3 E (Lower End) 405 to 415 Ω


If the result is not as specified, replace the fuel sender gauge assembly.