Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for 130 L Tank) › 2014.08–2016.08
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135871 FUEL SENDER GAUGE ASSEMBLY(for 130 L Tank) G

1GR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY(for 130 L Tank)  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

A289049C02
0.469,1.948 0.885,1.948 true 0.635,4.427 1.052,4.427 true 0.073,0.073 0.385,0.313 0.313,0.24 10 false *a 0.323,1.865 0.635,2.104 0.313,0.24 10 false F 0.469,4.354 0.781,4.594 0.313,0.24 10 false E
*a Component without harness connected
(Fuel Sender Gauge Assembly)


a.

Check the fuel sender gauge resistance.

i.

Check that the float moves smoothly between F (upper end) and E (lower end).


ii.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 F (Upper End) 12 to 18 Ω
1 - 3 E (Lower End) 405 to 415 Ω


If the result is not as specified, replace the fuel sender gauge assembly.