Home › Engine / Hybrid System › 1HZ (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR
RM25T0E _51 Engine / Hybrid System _029759 1HZ ENGINE CONTROL _0135873 ENGINE COOLANT TEMPERATURE SENSOR A

1HZ ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 89422A 2.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A329064

Disconnect the engine coolant temperature sensor connector from the engine coolant temperature sensor.


b.

Using a 19 mm deep socket wrench, remove the engine coolant temperature sensor and gasket from the oil cooler cover.


Hide 83420 3.REMOVE WATER TEMPERATURE SENDER GAUGE ASSEMBLY

a.
A329065

Disconnect the water temperature sender gauge connector from the water temperature sender gauge assembly.


b.

Using a 17 mm deep socket wrench, remove the water temperature sender gauge assembly from the cylinder head sub-assembly.