89422A 1.INSPECT ENGINE COOLANT TEMPERATURE SENSOR
| *a | Component without harness connected (Engine Coolant Temperature Sensor) |
*b | Resistance |
| *c | Acceptable Range | *d | Temperature |
Partially immerse the engine coolant temperature sensor in water and warm up the water.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 20°C (68°F) | 2.21 to 2.69 kΩ |
| 80°C (176°F) | 0.290 to 0.354 kΩ |
When checking the engine coolant temperature sensor in water, keep the terminals dry. After the check, wipe the engine coolant temperature sensor dry.
If the result is not as specified, replace the engine coolant temperature sensor.
83420 2.INSPECT WATER TEMPERATURE SENDER GAUGE ASSEMBLY
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - Body ground | 50°C (122°F) | 160 to 240 Ω |
| 120°C (248°F) | 17.1 to 21.2 Ω |
When checking the water temperature sender gauge assembly in water, keep the terminals dry. After the check, wipe the water temperature sender gauge assembly dry.
If the result is not as specified, replace the water temperature sender gauge assembly.