Home › Engine / Hybrid System › 1HZ (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR
RM25T0E _51 Engine / Hybrid System _029759 1HZ ENGINE CONTROL _0135873 ENGINE COOLANT TEMPERATURE SENSOR A

1HZ ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 83420 1.INSTALL WATER TEMPERATURE SENDER GAUGE ASSEMBLY

a.

Using a 17 mm deep socket wrench, install the water temperature sender gauge assembly to the cylinder head sub-assembly.

Torque:
34.3 N*m (350 kgf*cm, 25 ft.*lbf)


b.

Connect the water temperature sender gauge connector to the water temperature sender gauge assembly.


Hide 89422A 2.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

a.

Install a new gasket to the engine coolant temperature sensor.


b.

Using a 19 mm deep socket wrench, install the engine coolant temperature sensor to the oil cooler cover.

Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)


c.

Connect the engine coolant temperature sensor connector to the engine coolant temperature sensor.


Hide 4.INSPECT FOR COOLANT LEAK