51442 1.REMOVE NO. 2 ENGINE UNDER COVER
Remove the 4 bolts and No. 2 engine under cover.
2.DRAIN ENGINE COOLANT
53111 3.REMOVE RADIATOR GRILLE
16571C 4.REMOVE NO. 1 RADIATOR HOSE
Slide the 2 hose clamps and remove the No. 1 radiator hose from the radiator assembly and water inlet housing.
16572D 5.REMOVE NO. 2 RADIATOR HOSE
Slide the 2 hose clamps and disconnect the oil cooler hose and No. 2 oil cooler hose from the oil cooler assembly.
Slide the 2 hose clamps and remove the No. 2 radiator hose from the radiator assembly and water inlet housing.
Detach the clamp.
As shown in the illustration, open the hose clamp while pushing in the claws on both sides of the clamp, and then remove it.
16711 6.REMOVE FAN SHROUD
Loosen the 4 nuts holding the fan with fluid coupling.
Remove the fan and generator V-belt.
Click hereEngine / Hybrid System>1GR-FE (ENGINE MECHANICAL)>DRIVE BELT>REMOVAL
Detach the clamp and disconnect the reservoir hose from the radiator assembly.
Remove the 3 bolts and radiator reservoir.
Remove the 4 bolts holding the fan shroud.
Remove the 4 nuts of the fan with fluid coupling, and then remove the fan shroud together with the fan with fluid coupling.
Be careful not to damage the radiator core.
Remove the fan pulley from the engine water pump assembly.
16400 7.REMOVE RADIATOR ASSEMBLY
Remove the 4 bolts and radiator assembly.
16584 8.REMOVE RADIATOR MOUNTING INSULATOR
| *1 | No. 1 Radiator Support Collar |
| *2 | Radiator Mounting Insulator |
Remove the 2 No. 1 radiator support collars and 2 radiator mounting insulators.