Home › Engine / Hybrid System › 1HZ (FUEL) › FUEL TANK(for 90 L Tank Carried in Rear)
RM25T0E _51 Engine / Hybrid System _029893 1HZ FUEL _0136497 FUEL TANK(for 90 L Tank Carried in Rear) A

1HZ FUEL  FUEL TANK(for 90 L Tank Carried in Rear)  REMOVAL  


PROCEDURE

Hide 1.DRAIN FUEL

A334063

a.

Loosen the fuel tank drain plug, gasket and drain the fuel.


b.

Install the fuel tank drain plug and a new gasket.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


Hide 2.DISCONNECT FUEL MAIN HOSE

a.
A334064

Slide the clip and disconnect the fuel main hose from the fuel suction tube assembly.


Hide 3.DISCONNECT FUEL RETURN HOSE

a.
A334065

Slide the clip and disconnect the fuel return hose from the fuel suction tube assembly.


Hide 77213 4.DISCONNECT INLET FUEL HOSE

a.
A334066

Slide the clamp and disconnect the inlet fuel hose from the lower fuel tank filler pipe sub-assembly.


Hide 77100D 5.DISCONNECT FUEL BREATHER HOSE

a.
A334067

Slide the clamp and disconnect the fuel breather hose from the fuel tank assembly.


Hide 77100 6.REMOVE FUEL TANK

a.
A334068

Disconnect the fuel sender gauge connector.


b.

Set an engine lifter underneath the fuel tank assembly.


c.
A334069

Remove the 2 bolts and separate the 2 fuel tank bands.


d.

Slightly lower the engine lifter.


Hide 8.REMOVE FUEL SUCTION TUBE ASSEMBLY

A334070

a.

Remove the 5 screws and fuel suction tube assembly.


b.

Remove the gasket from the fuel suction tube assembly.


Hide 77011 9.REMOVE LOWER FUEL TANK FILLER PIPE SUB-ASSEMBLY

a.
A166810

Remove the 6 screws and lower fuel tank filler pipe sub-assembly from the fuel tank assembly.


b.

Remove the gasket from the lower fuel tank filler pipe sub-assembly.