Home › Engine / Hybrid System › 1HZ (FUEL) › FUEL TANK(for 90 L Tank Carried in Rear) › 2014.08–2016.08
RM25T0E _51 Engine / Hybrid System _029893 1HZ FUEL _0136497 FUEL TANK(for 90 L Tank Carried in Rear) A

1HZ FUEL  FUEL TANK(for 90 L Tank Carried in Rear)  INSTALLATION  


PROCEDURE

Hide 77011 1.INSTALL LOWER FUEL TANK FILLER PIPE SUB-ASSEMBLY

a.

Install a new gasket to the lower fuel tank filler pipe sub-assembly.


b.

Install the lower fuel tank filler pipe sub-assembly to the fuel tank assembly with the 6 screws.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


Hide 2.INSTALL FUEL SUCTION TUBE ASSEMBLY

a.

Install a new gasket and the fuel suction tube assembly with the 5 screws.

Torque:
1.5 N*m (15 kgf*cm, 13 in.*lbf)


Hide 77100 4.INSTALL FUEL TANK

a.

Set the fuel tank assembly and No. 1 fuel tank protector sub-assembly on an engine lifter.


b.

Raise the engine lifter.


c.

Connect the 2 fuel tank bands with the 2 bolts.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


d.

Connect the fuel sender gauge connector.


Hide 77100D 5.CONNECT FUEL BREATHER HOSE

a.

Connect the fuel breather hose to the fuel tank assembly, and slide the clamp to secure the hose.


Hide 77213 6.CONNECT INLET FUEL HOSE

a.

Connect the inlet fuel hose to the lower fuel tank filler pipe sub-assembly, and slide the clamp to secure the hose.


Hide 7.CONNECT FUEL RETURN HOSE

a.

Connect the fuel return hose to the fuel suction tube assembly, and slide the clamp to secure the hose.


Hide 8.CONNECT FUEL MAIN HOSE

a.

Connect the fuel main hose to the fuel suction tube assembly, and slide the clamp to secure the hose.