Home › Engine / Hybrid System › 1HZ (FUEL) › FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Middle) › 2014.08–2016.08
RM25T0E _51 Engine / Hybrid System _029893 1HZ FUEL _0136504 FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Middle) G

1HZ FUEL  FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Middle)  INSPECTION  


PROCEDURE

Hide 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

a.
A211817C01
1.083,2.24 0.406,2.24 false 1.875,4.333 1.208,4.333 false 0.083,0.115 0.281,0.281 0.198,0.167 10 false *a 0.271,2.156 0.396,2.302 0.125,0.146 10 false F 1.063,4.24 1.188,4.385 0.125,0.146 10 false E
*a Component without harness connected
(Fuel Sender Gauge Assembly)


Check the fuel sender gauge resistance.

i.

Check that the float moves smoothly between F (upper end) and E (lower end).


ii.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 F (Upper End) 12 to 18 Ω
1 - 2 E (Lower End) 405 to 415 Ω


If the result is not as specified, replace the fuel sender gauge assembly.