Home › Engine / Hybrid System › 1VD-FTV (INTAKE / EXHAUST) › INTERCOOLER › 2014.08–2022.09
RM25T0E _51 Engine / Hybrid System _029894 1VD-FTV INTAKE / EXHAUST _0136510 INTERCOOLER A

1VD-FTV INTAKE / EXHAUST  INTERCOOLER  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 87249B 3.DISCONNECT OUTLET HEATER WATER PIPE B

A163338

a.

Remove the 2 bolts and disconnect the outlet heater water pipe B from the intercooler assembly.


Hide 17341F 4.REMOVE NO. 1 AIR HOSE

A163339

a.

Loosen the 2 clamps and remove the No. 1 air hose.


Hide 17940D 5.REMOVE INTERCOOLER ASSEMBLY

A163340

a.

Disconnect the turbo pressure sensor connector.


b.

Disconnect the vacuum hose.


c.

Disconnect the intake air temperature sensor connector.


d.
A163341

Remove the 4 nuts and disconnect the No. 1 and No. 2 cool air inlets from the intercooler assembly.


e.

Remove the 2 bolts, 2 nuts, intercooler assembly and 2 gaskets.


f.
A163342

Remove the 4 bolts and intercooler protector from the intercooler assembly.