Home › Engine / Hybrid System › 1GR-FE (ENGINE MECHANICAL) › CYLINDER HEAD
RM25T0E _51 Engine / Hybrid System _029891 1GR-FE ENGINE MECHANICAL _0136561 CYLINDER HEAD A

1GR-FE ENGINE MECHANICAL  CYLINDER HEAD  REASSEMBLY  


PROCEDURE

Hide 13734 1.INSTALL VALVE SPRING SEAT

a.
A326712

Install the valve spring seat.


Hide 2.INSTALL VALVE

a.
A326713C01
2.135,0.563 2.448,0.76 0.313,0.198 10 false *a
*a 35 mm (1.38 in.)


Apply plenty of engine oil to the tip area of the valve shown in the illustration.


b.
A326691N01
2.052,0.323 2.208,0.323 2.208,0.323 2.208,0.677 false 1.792,0.229 2.25,0.427 0.458,0.198 10 false SST

Place the cylinder head on wooden blocks.


c.

Install the valve, inner compression spring and valve spring retainer to the cylinder head.

NOTICE:

Install the same parts in the same combination to their original locations.



d.

Using SST, compress the inner compression spring and place the valve spring retainer lock around the valve stem.

SST
09202-70020  (09202-00010)


e.

Using a 5 mm pin punch and hammer, lightly tap the valve stem tip to ensure a proper fit.

NOTICE:

Be careful not to damage the valve stem tip.



Hide 13751 3.INSTALL VALVE LIFTER

a.
A326715

Apply engine oil to the valve stem end and valve lifter and install the valve lifter to the valve stem.


b.

Check that the valve lifter rotates smoothly by hand.