Home › Drivetrain › CLUTCH › CLUTCH MASTER CYLINDER (for RHD)
RM25T0E _52 Drivetrain _029901 CLUTCH _0136567 CLUTCH MASTER CYLINDER(for RHD) A

CLUTCH  CLUTCH MASTER CYLINDER(for RHD)  REMOVAL  


PROCEDURE

Hide 31440P 1.REMOVE CLUTCH MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

Hide 31426 2.REMOVE CLUTCH MASTER CYLINDER RESERVOIR FLOAT

Hide 3.DRAIN CLUTCH FLUID

Hide 31410 4.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

a.
C163062

Using a union nut wrench, disconnect the clutch master cylinder to flexible hose tube.

HINT:

Use a container to catch the fluid.



b.
C163271

Remove the clip and clutch master cylinder push rod clevis pin.


c.
C163255

Remove the 2 nuts and clutch master cylinder assembly.


d.

Remove the gasket.