Home › Drivetrain › CLUTCH › CLUTCH RELEASE CYLINDER (for 1GR-FE)
RM25T0E _52 Drivetrain _029901 CLUTCH _0136568 CLUTCH RELEASE CYLINDER(for 1GR-FE) A

CLUTCH  CLUTCH RELEASE CYLINDER(for 1GR-FE)  REASSEMBLY  


PROCEDURE

Hide 31477 1.INSTALL RELEASE CYLINDER BLEEDER PLUG

a.

Install the release cylinder bleeder plug to the clutch release cylinder body.

Torque:
10.8 N*m (110 kgf*cm, 8 ft.*lbf)


b.

Install the bleeder plug cap.


Hide 04313 2.INSTALL CLUTCH RELEASE CYLINDER KIT

a.

Install 2 new cylinder cups onto a new piston.


b.

Install a new spring to the piston.


c.
C128485C04
0,0 0,0 false
V100135

Lithium soap base glycol grease


Apply lithium soap base glycol grease to the portions indicated by the arrows in the illustration.


d.

Install the piston with the spring to the clutch release cylinder body.

NOTICE:

Do not damage the inside of the cylinder body.



e.

Install the push rod to a new boot.


f.

Install the boot with the push rod to the clutch release cylinder body.