31470 1.INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY
Install the clutch release cylinder assembly with the 2 bolts.
31418 2.INSTALL CLUTCH HOSE
Install a new union sheet into the cylinder plug.
| *a | Torque Wrench Fulcrum Length |
Using a union nut wrench, install the clutch hose labeled A to the clutch release cylinder assembly.
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
When using a union nut wrench (fulcrum length of 30 mm (1.1811 in.)) + torque wrench (fulcrum length of 300 mm (11.811 in.)): 20.9 N*m (213 kgf*cm, 15 ft.*lbf)
Connect the clutch hose to the bracket with a new clip labeled B.
Using a union nut wrench, connect the clutch release cylinder to flexible hose tube labeled C to the clutch hose.
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 300 mm (11.811 in.)): 14.2 N*m (145 kgf*cm, 10 ft.*lbf)
3.FILL BRAKE FLUID RESERVOIR
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING
4.BLEED CLUTCH LINE
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING
5.CHECK FLUID LEVEL IN RESERVOIR
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING
6.CHECK FOR CLUTCH FLUID LEAK